SOLVED Tool change script - what to use for hybrid titan mirrored setup?

Discussion in 'Calibration, Help, and Troubleshooting' started by Pierce, Dec 11, 2016.

  1. Pierce

    Pierce Well-Known Member

    Joined:
    Sep 4, 2015
    Messages:
    249
    Likes Received:
    67
    Hey All,

    Been experimenting with dual printing this weekend. Been using Alex's excellent simplyf3d profiles but they don't seem to have the tool change script loaded? I downloaded the official profiles but that tool change script results in lots of bangs and crashes with the dump bucket.

    What are people using these days for dual printing where you have hybrid titans (that is one direct, one bowden)?

    thanks!
    Pierce
     
  2. Alex9779

    Alex9779 Moderator
    Staff Member

    Joined:
    Sep 4, 2015
    Messages:
    2,405
    Likes Received:
    731
    As far as I remember there is an extruder setup with the ram purge scripts available in the profiles...
    You should have four possibilities in "Auto-configure extruders", one of them "Both Extruders Oozeless/Ram purge"...
     
    Pierce likes this.
  3. Pierce

    Pierce Well-Known Member

    Joined:
    Sep 4, 2015
    Messages:
    249
    Likes Received:
    67

    Ah, I really need to learn simplify3d a bit more, you are indeed correct of course, never even looked at that drop down before its always just been set to "both extruders".

    thanks!
     

Share This Page