Posted this in error in the E3D forum. Re-posting here. I am absolutely new to OctoPi/Octoprint. Running on Pi 4B 8GB. Printers connected via Pi USB, PC connects to PI via wired Ethernet. Windows 10, FF 110.0.1. In Octoprint terminal can see the initial connection dialog and replies from the printer. Can "auto home" the printer via Octoprint controls. Can get one +X (for instance) and the printer moves properly. And subsequent commands do not process. I can see them go out via Terminal, but, nothing happens. I'm pretty much at a loss. Attached is snippet of initial connection dialog.