V6 + Titan

Discussion in 'E3D-v6 and Lite6' started by mproper23, Aug 30, 2017.

  1. mproper23

    mproper23 Member

    Joined:
    Feb 23, 2017
    Messages:
    5
    Likes Received:
    0
    Hi,
    i bought an Prusa i3 upgrade kit. must I insert a PTFE tube between the Titan and into the V6?
    If yes how long must this tube be?

    thanks.

    greetings Andy
     
  2. Old_Tafr

    Old_Tafr Well-Known Member

    Joined:
    Mar 7, 2016
    Messages:
    560
    Likes Received:
    75
    I guess there is no info info on Titan and V6 starting here...?

    https://wiki.e3d-online.com/wiki/Main_Page

    Printer specific guides​

    then...​

    E3D -V6 on Prusa i3

    Gets you to...​

    https://wiki.e3d-online.com/wiki/E3D-v6_on_Prusa_i3

    There is some info on the ptfe here e.g. in "Assembly steps" if that isn't applicable then ask E3D to add something, and anyone can ask for permission to edit the WiKi so as and when you get the info you will be able to add a note yourself.
     
  3. Spoon Unit

    Spoon Unit Well-Known Member

    Joined:
    Sep 6, 2015
    Messages:
    1,095
    Likes Received:
    322

Share This Page