SOLVED X-Axis Assembly Piece Missing

Discussion in 'Build Help' started by Josh C., Jun 30, 2016.

  1. Josh C.

    Josh C. Member

    Joined:
    Jun 30, 2016
    Messages:
    15
    Likes Received:
    0
    I NEED HELP!!! I bought the dual extruder model and i can't find the printed x axis idler piece. Please tell me if it has changed since the instructions updated or if its in a weird box

    Thanks, Josh
     
    #1 Josh C., Jun 30, 2016
  2. Alex9779

    Alex9779 Moderator
    Staff Member

    Joined:
    Sep 4, 2015
    Messages:
    2,411
    Likes Received:
    735
    #2 Alex9779, Jun 30, 2016
  3. Josh C.

    Josh C. Member

    Joined:
    Jun 30, 2016
    Messages:
    15
    Likes Received:
    0
    I did find the part but the bearings that are supposed to fit in do not. I will send a picture. I could grind it with a dremel but i don't want to mess it up.
     

    Attached Files:

    #3 Josh C., Jun 30, 2016
  4. PsyVision

    PsyVision Moderator
    Staff Member

    Joined:
    Sep 4, 2015
    Messages:
    798
    Likes Received:
    248
    Are you sure you have the right size bearing? That looks too large. Its a 604zz not a 688zz
     
    #4 PsyVision, Jun 30, 2016
  5. Josh C.

    Josh C. Member

    Joined:
    Jun 30, 2016
    Messages:
    15
    Likes Received:
    0
    Is it one of the bearings in the tube in the extruder box?
     
    #5 Josh C., Jun 30, 2016
  6. PsyVision

    PsyVision Moderator
    Staff Member

    Joined:
    Sep 4, 2015
    Messages:
    798
    Likes Received:
    248
    No, as these are smaller and there aren't that many with the kit.

    The manual says they are in with the printed parts.
     
    #6 PsyVision, Jun 30, 2016
  7. Josh C.

    Josh C. Member

    Joined:
    Jun 30, 2016
    Messages:
    15
    Likes Received:
    0
    thank you so much
     
    #7 Josh C., Jun 30, 2016
(You must log in or sign up to post here.)

Share This Page