Z-Axis bed offset and dual commissioning

Discussion in 'Calibration, Help, and Troubleshooting' started by Brian Dowling, May 7, 2016.

  1. corey

    corey Well-Known Member

    Joined:
    Sep 4, 2015
    Messages:
    106
    Likes Received:
    21
    ABL auto bed leveling i believe you get with the pro, MBL mesh bed leveling that you get with the dual, it levels the bed using 9 points across the bed which is suggested to be a more accurate way of leveling the bed.......
     
    Pter likes this.
  2. Alex9779

    Alex9779 Moderator
    Staff Member

    Joined:
    Sep 4, 2015
    Messages:
    2,411
    Likes Received:
    735
    ABL uses auto bed leveling, MBL uses mesh bed leveling
     
  3. Kick2box

    Kick2box Well-Known Member

    Joined:
    Mar 15, 2016
    Messages:
    198
    Likes Received:
    27
  4. mike01hu

    mike01hu Well-Known Member

    Joined:
    Apr 22, 2014
    Messages:
    957
    Likes Received:
    167
    ABL = Auto Bed Levelling - only used on Light and Pro BB's but you can swap to MBL
    MBL = Manual/Mesh Bed Levelling means you go through an interactive process, guided by the firmware, to determine the difference in level across the build platform.
     
  5. Michael Frampton

    Michael Frampton Well-Known Member

    Joined:
    Aug 5, 2016
    Messages:
    88
    Likes Received:
    7
    Hi,im new here,,having spent 40hrs building, ,spent a day trying to set z offset and failed,,i have 1.1 with hybrid and titans. What updates and methods should i use to set bed height? Nozzles being skidded across bed is common place ,if not nozzle is so high that filament is not extruded directly onto bed,very frustrating. Also do i need fw from Alex to accomplish this? Many thx
     

Share This Page