Z-axis moves instead of extruders

Discussion in 'Build Help' started by Falc.be, Mar 27, 2016.

  1. Falc.be

    Falc.be Well-Known Member

    Joined:
    Sep 4, 2015
    Messages:
    263
    Likes Received:
    40
    ok very weird problem

    when i try to move one of the extruder motors, the z axis instead moves about 4mm and then stops, this is for both extruders.

    wiring has been double checked and is correct, as is the motion of the z axis when i actually try to move the z axis
    any ideas ?
     
    #1 Falc.be, Mar 27, 2016
  2. Kanedias

    Kanedias Well-Known Member

    Joined:
    Sep 12, 2015
    Messages:
    407
    Likes Received:
    124
    Can you post a picture of your wiring?
     
    #2 Kanedias, Mar 27, 2016
  3. Falc.be

    Falc.be Well-Known Member

    Joined:
    Sep 4, 2015
    Messages:
    263
    Likes Received:
    40
    Wiring is correct, it happens on both extruders
     
    #3 Falc.be, Mar 27, 2016
  4. Kick2box

    Kick2box Well-Known Member

    Joined:
    Mar 15, 2016
    Messages:
    198
    Likes Received:
    27
    This is normal behaviour when trying a cold extrude. Heat up before using the extruders!
     
    #4 Kick2box, Mar 27, 2016
  5. Falc.be

    Falc.be Well-Known Member

    Joined:
    Sep 4, 2015
    Messages:
    263
    Likes Received:
    40
    Sigh ....

    Ok

    And now i have to go to easter dinner, no printing today ....
     
    #5 Falc.be, Mar 27, 2016
(You must log in or sign up to post here.)

Share This Page